Back to the Knowledge Hub
Funding & financePractical guide

A practical guide to home-improvement finance

Warm Homes Loan Scheme: what it covers and who can apply

The Warm Homes Loan Scheme is open now. It launched on 27 October 2026, when the government named the first ten lenders. It cuts the interest rate on loans for solar panels, batteries and heat pumps by up to 5 percentage points, and some of those loans are interest-free. You can borrow up to £15,000 for solar, £15,000 for a battery and £20,000 for an air-to-water heat pump — and the heat pump loan sits on top of a £7,500 Boiler Upgrade Scheme grant, not instead of it.

Published 6 November 2026 · Written by Patrick Brendan, OCDEA EES/032946, Grassendale Ecohouse

What is the Warm Homes Loan Scheme?

The Warm Homes Loan Scheme is a cheaper loan, not a grant. The government pays participating lenders a non-repayable grant worth up to 20% of each loan, and the scheme rules require the lender to pass that straight on to you as a lower interest rate. It is run by the Department for Energy Security and Net Zero as part of the £15bn Warm Homes Plan.

The government is not the lender. Ordinary FCA-regulated banks and finance companies lend the money in the normal way, with their usual credit and affordability checks. The government support sits behind the lender and brings your rate down.

That distinction matters when you are deciding what to do. Nobody is giving you £20,000. They are making £20,000 considerably cheaper to borrow, and in some cases free to borrow.

Is the Warm Homes Loan Scheme open yet?

Yes. It opened on 27 October 2026, when the government published its list of the first ten participating lenders. Ten were lending at launch, some offering 0%, with repayment terms stretching to 30 years in some cases. More lenders and products are expected as the scheme develops.

The lenders named at launch include HomeServe Finance (partnered with E.ON Next), Tandem Bank (partnered with British Gas), Propensio, Secure Trust Bank, Selina Finance, South Manchester Credit Union, Sunsave and The Money Co-op. The current list lives on GOV.UK and will grow — check there rather than relying on any installer's version of it.

You do not apply to the government. You apply to a lender on that list, either directly or through an installer or retailer that arranges its finance. Some lenders only lend through their approved installers, so the order you do things in matters.

How much can you borrow, and for what?

The caps are set per technology, and a heat pump cap is measured before any grant comes off.

  • Solar panels (solar PV): £15,000
  • Electrical storage battery: £15,000
  • Air-to-water heat pump: £20,000 (before the BUS grant is deducted)
  • Ground source heat pump (incl. water source, shared ground loops): £35,000 (before the BUS grant is deducted)
  • Biomass boiler (rural properties only, with a grant): £20,000 (before the BUS grant is deducted)
  • Heat network connection: £7,500
  • Domestic wind turbine or micro-hydro: £20,000
  • Air-to-air heat pump: £10,000 — not yet claimable, see below

Related installation work counts inside the relevant cap rather than on top of it. Two things are worth knowing before you plan around this: insulation is not funded as part of a heat pump installation, and underfloor heating is not an eligible measure on its own.

How much does the lower rate actually save?

The government's own figure is up to £285 a year off repayments. The real answer depends on the rate you would otherwise have been offered, the amount and the term.

A published example makes it concrete. On HomeServe Finance's terms, a £9,695 solar-and-battery system costs around £2,350 more over ten years at 4.6% APR than paying cash — and nothing extra at all at 0% over five years. The shorter, interest-free version of the same system is the one where borrowing costs you nothing.

Two limits on the mechanism are worth understanding:

  • Your rate cannot go below zero. The discount is capped at 5 percentage points, and if your starting rate is lower than that, you land at 0% rather than being paid to borrow.
  • The grant only applies to loans of three years or more. A very short term takes you outside the support.

Longer terms and higher starting rates make the 20% grant cap more likely to bind, so the full 5 points is a ceiling rather than a promise. Ask each lender for the rate with the scheme applied, in writing, before you commit.

Can you use it alongside the Boiler Upgrade Scheme?

Yes, and for a heat pump this is the combination that does the real work. The Boiler Upgrade Scheme pays a £7,500 grant towards an air-to-water or ground source heat pump in England and Wales. The Warm Homes loan then covers the cost above that grant.

So a £13,000 heat pump installation looks like this: £7,500 comes off as a BUS grant, and the remaining £5,500 is what you borrow — at a rate up to 5 points lower than a standard loan, and possibly at 0%. That is a different proposition from finding £13,000.

In Scotland the loan combines with Home Energy Scotland grants instead. If you receive no grant at all, you can borrow for the full installation cost up to the cap. The one rule to respect: you cannot use a Warm Homes loan and other government funding to pay for the same improvement — the BUS and Home Energy Scotland are the named exceptions, and you must declare any other public funding.

Who can apply?

You need to own a domestic property in the UK, with or without a mortgage. There is no income test and no minimum EPC rating at scheme level.

  • Owner-occupiers of existing homes.
  • Private landlords, borrowing personally rather than through a company.
  • Owners of several properties can apply for a loan on each one.
  • Mixed-use properties qualify where the installation mainly serves the household's energy needs.

Lending to businesses or SPV-type structures is not allowed in this phase. Lenders still run their own affordability and credit checks, so eligibility for a measure is not the same as approval for a loan.

What the scheme does not cover

Three gaps catch people out, and one of them has been widely reported wrongly.

Air-to-air heat pumps are listed but not yet claimable. The rules set a £10,000 cap for them, but they are not currently eligible because the MCS standards for them do not yet exist. They are expected to come in once certification is in place. If you have read that air-to-air is covered, that is the rules looking forward, not something you can borrow for today.

Insulation is not funded as part of a heat pump installation, and it does not appear on the eligible measures list. If insulation is what your house actually needs first, the Warm Homes: Local Grant route through your council is the one to look at — it is income-assessed, where this scheme is not.

Every loan-funded installation must use MCS-certified products fitted by an MCS-certified installer, to the relevant MCS design and installation standard. This is not a formality. It is the thing that decides whether your quote is fundable.

Why the next few months matter more than the deadline suggests

There is no closing date on the loan scheme. There is a closing date on the tax relief sitting underneath it.

The 0% VAT rate on energy-saving materials ends on 31 March 2027. From 1 April 2027, insulation, heat pumps, solar panels, batteries and heating controls return to the 5% reduced VAT rate. On a £15,000 installation that is roughly £750 that does not exist today. Windows and doors were never in the relief and stay at 20%.

Two other dates sit in the same window: ECO4 closes on 31 December 2026 with no successor announced, and the October 2026 Budget took £1bn of capital grant out of the wider Warm Homes Plan while leaving the loan scheme itself untouched. The loan is the part of the package that survived intact — and the cheapest version of the work is the one completed while the VAT relief still applies.

What to do before you borrow

Get a room-by-room heat loss calculation before you accept a heat pump quote. MCS-compliant heat pump design starts here, and it determines the output you need, whether your existing radiators can run at a lower flow temperature, and which rooms need attention first. An undersized heat pump will not keep up; an oversized one cycles, costs more to run and costs more to buy.

Have solar and battery sized against your actual consumption, not your roof. This is the question in your own head if you have ever looked at a large array and wondered whether your electricity use justified it. Half-hourly consumption data answers it properly, and it is the difference between a battery that pays for itself and one that sits half-used.

Check your lender's installer route first. Some lenders only finance installations by their own approved installers. Choosing the installer before the lender can close doors you wanted open.

Get the scheme-applied rate in writing. The up-to-5-points discount is a ceiling. Compare what each lender actually offers on your amount and term.

Keep the survey evidence. MCS paperwork, the heat loss calculation and the design documents are what the installer and lender need, and what protects you if the installation underperforms.

Independent assessment before you commit is the cheapest part of the whole project, and it is the only part that tells you what you are buying.

Where we come in

We are not installers, and we do not sell heat pumps or solar panels. We do the assessment work that sits in front of the decision: room-by-room heat loss calculations, heat pump surveys, solar and battery surveys, EPCs and SAP calculations, across Merseyside, the North West and nationally.

If you are weighing up a Warm Homes loan and want to know what your house actually needs before you borrow against it, a heat loss calculation or a solar and battery survey is the place to start. Tell us about the property and we will tell you what the assessment involves and what it costs.

Sources

Sources accessed 6 November 2026.

Key takeaway

The Warm Homes Loan Scheme makes borrowing cheaper, but an independent assessment helps you understand what your home needs before you commit.