Back to Grassendale Ecohouse

Local energy guidance · Home Counties

SAP Calculations & OCDEA in the Home Counties

Design-stage and as-built SAP support for new homes, extensions, conversions and residential developments across the Home Counties. We help architects, developers and project teams understand how the building fabric, glazing, heating and renewable systems affect the energy result and Part L evidence.

Updated 14 September 2026 · the Home Counties property guidance

Red-brick house under construction with scaffolding and exposed roof trusses

Why does the Home Counties property context matter?

The Home Counties carry a high volume of planning applications spanning very different kinds of work. Alongside conventional new-build, the region sees a substantial amount of high-value self-build, major extensions and replacement-dwelling projects, often on individual plots within established towns, villages and Green Belt settlements.

That breadth matters for energy assessment because the market is not one uniform building type. A Surrey replacement dwelling, a Hertfordshire self-build, a Kent barn conversion and an Essex rear extension can each have different construction approaches, planning constraints and heating strategies. A calculation should reflect the specific design and its proposed build-ups, not a generic description of the area.

Where a site sits within the Green Belt or a conservation area, the planning conversation and the energy conversation are separate but need to be coordinated. A SAP calculation can inform the energy-performance evidence for new dwellings and relevant extensions, but planning consent sits with the relevant local authority.

Brick-built residential development under construction

Evidence before assumptions

A clearer route from property to decision.

The useful output is not just a number. It is a record of the building, the assumptions behind it and the practical choices the next person on the project needs to make.

  • SAP calculations for Home Counties projects
  • New-build and replacement dwellings
  • Self-build and custom build

What can the assessment help you decide?

SAP calculations for Home Counties projects

Design-stage and as-built SAP support for new homes, extensions, conversions and residential developments across the Home Counties. We help architects, developers and project teams understand how the building fabric, glazing, heating and renewable systems affect the energy result and Part L evidence. Because the Home Counties cover many separate counties and districts, each project is assessed against the design in front of you rather than a regional average. The correct jurisdiction, local planning authority and submission stage are confirmed at the start so the right evidence is produced for the right decision.

New-build and replacement dwellings

Replacement and high-specification new-builds are common across the region. Design-stage SAP work lets the team coordinate insulation, thermal bridges, glazing, airtightness, ventilation and heating or renewables together, so the specification and the compliance evidence stay aligned.

Self-build and custom build

Self-builders often hold strong views about construction method and specification. Early SAP support helps translate those choices into a coordinated energy strategy, testing build-ups and services before drawings are fixed and identifying any information the designer still needs to confirm.

Extensions and conversions

Extensions, barn conversions and change-of-use projects bring new thermal elements and junctions between old and new construction. A calculation for these should describe the relationship between the retained building and the new work clearly, rather than treating a simple floor-area figure as the whole story.

What should you prepare for a SAP calculation?

The most useful starting information is anything that describes the dwelling as it is intended to be built. Missing information can be identified openly rather than silently filled with assumptions.

  • Proposed floor plans, sections and elevations for each dwelling
  • Wall, floor and roof build-ups, including insulation type and thickness
  • Window and door schedules, including frame types, glazing and rooflights
  • Heating, hot-water and ventilation proposals, including any renewables
  • The intended submission stage and any known Building Regulations questions
  • Any planning, Green Belt or conservation constraints already identified

Questions about heat loss and site surveys in the Home Counties

Do you need to be local to the Home Counties to use your SAP service?

No. SAP calculations and OCDEA services are produced from supplied drawings and specifications, so assessments can be delivered remotely. Sharing the postcode, jurisdiction and project stage with the initial enquiry lets us confirm the scope.

Which councils can this cover?

Any of the local planning authorities across Surrey, Berkshire, Buckinghamshire, Hertfordshire, Essex, Kent and Sussex. Because the assessment is delivered remotely, the specific district council does not limit the project.

Do I need a full SAP or is RdSAP enough for my Home Counties project?

Full SAP is used for relevant new-build and design-stage assessments where detailed construction and specification information is available. RdSAP is used for existing dwellings with a defined set of conventions and assumptions. The correct methodology depends on the project type.

When should I bring in the SAP assessor for a new-build or extension?

The best time is when the design is still flexible. Changing insulation build-ups, window specifications or heating assumptions late in the process can create rework and may affect the compliance result.

Can a SAP calculation help with a self-build or custom-build scheme?

Yes. Design-stage SAP work helps translate construction choices into a coordinated energy strategy, testing build-ups and services before drawings are fixed and identifying what the designer still needs to confirm.

Does a SAP calculation guarantee a planning or building-control outcome?

No. A SAP calculation provides a standardised energy-performance assessment based on the information supplied. It supports compliance evidence and design decisions, but planning consent and Building Regulations approval sit with the designer and the relevant local authority.

More coverage

Explore related project areas

Ready to talk it through?

Discuss your the Home Counties project.

Send a short outline of the property, project stage and the information you need. We can confirm whether a calculation, site survey or wider assessment is the right starting point.

Discuss your project

Sources and local context

Local context is general guidance, not a statement about every property. Planning, heritage, access and construction questions should be confirmed for the individual building.